Automotive

Description

• The refrigerator is designed to fit discreetly in the trunk of a Tesla Model Y, maximizing space without taking up extra area.
• With a 15-liter capacity, the fridge has plenty of room to store drinks, snacks, and even fresh food for longer travels.
• It uses innovative cooling technology to keep the contents at a consistent, cool temperature, ensuring that food and beverages stay fresh for longer periods of time.
• The refrigerator functions silently, minimizing noise within the cabin or trunk, making it ideal for extended trips without interruption.

Description

• Compatible Models: 2017-2023 Model 3, Highland Model 3, 2020-2024 Model Y, 2021-2024 Model S, and 2021-2024 Model X.
• Upgrade Function: When the frunk is set to half-shut, it will suck and close automatically.
• Automatic Suction: If the front trunk is mistakenly opened after installing this product, it will close automatically within two minutes.
• Humanized Design: The device includes a clever anti-pinch function.
• Non-destructive Installation: There is no need to drill holes in the vehicle or destroy the wire harness; simply replace the original vehicle components.
• Power: 12V (8.5-16V), quiescent current <30mA, sleep current <70uA.

The quickest 11.1V rechargeable battery air pump on the market. Inflating a medium-sized car’s 26.3″ tire (28-33 PSI) takes only 56 seconds. It inflates with a precision of ±1 PSI. It is the best choice for a tire inflator because it is both fast and accurate. Under normal outdoor temperatures, the X8 Apex can operate continuously for 40 minutes on a full charge. It can pump 16 tires constantly without pausing thanks to our ingenious proprietary cooling system. No need to wait for cooling. It has four preset inflation modes (bikes, motorcycles, vehicles, and balls) and three preset units (PSI, KPA, and BAR). With a single click, you can choose the appropriate inflation mode, and the philosophy is set-and-forget. When the X8 Apex reaches the predetermined pressure value, it will automatically stop, allowing you to relax without having to check it constantly.

The X9 Ultra is a 6X quicker inflator with a digital gauge that is suitable for Cybertrucks, SUVs, EVs, and compact cars. Furthermore, the 3-in-1 function (air pump, power station, and flashlight) enables the X9 Ultra to meet the practical needs of outdoor enthusiasts. In just 58 seconds, the flagship inflator inflates a 33-inch truck tire to the appropriate 30-35 PSI with an unprecedented precision of ±1 PSI. The X9 Ultra smoothly integrates a tire inflator, a 92.5Wh portable power station, and a bright flashlight. It provides a reliable power source for drones, laptops, smartphones, and other devices, as well as lighting up your campsite. With a huge 5Ah (18.5V) battery, this inflator can fill 25 truck tires up to 33 inches (30PSI to 35PSI) on a single charge. It can also fill 4.5 pickup tires (ranging from 0 to 35 PSI) with a single charge.

Description

Approximately 72 pounds; built-in winch plate capable of lifting up to 12,000 pounds; Two 9,500-pound-rated D-ring mounts. D-rings with rubber ring to reduce friction and collision with bumper; Strong Bull Bar with Textured Black Powder Coat Finish. The bumper body is made of 11-gauge (1/8 inch) steel, the winch plate is made of 10-gauge (9/64 inch), the mounting structure plate is made of 8-gauge (11/64 inch),

Package Included

• 1 x Jeep JL Front Bumper w/Winch Plate
• 2 x 18W Square LED Spotlights
• 2 x 18W Horizontal LED Spotlights
• 2 x D-rings
• Mounting Hardware

.

Description

Approximately 68 pounds; built-in winch plate capable of lifting up to 12,000 pounds. Two 9,500-pound-rated D-ring mounts. D-rings with rubber ring to reduce friction and collision with bumper; Strong bull bar. Heavy duty. High strength steel construction; heavy-duty, high tensile. The bumper body is made of 11-gauge (1/8 inch) steel, the winch plate is made of 10-gauge (9/64 inch), the mounting structure plate is made of 8-gauge (11/64 inch), and the bull bar is made of 2.0″ diameter × 0.059″ thick steel tubing. Features a textured black powder coat finish and a simple bolt-on installation.

Features

• 1 x Jeep JL Front Bumper w/Winch Plate
• 2 x 18W Square LED Spotlights
• 2 x 18W Horizontal LED Spotlights
• 2 x D-rings
• Mounting Hardware

The Kemimoto rear soft windshield now includes a zipper design that allows you to roll up the glass without having to remove the entire windshield. And the enlarged PVC area will not obstruct your rear vision. Simply attach the loop and hook to the roll cage of UTVs and you’re done. A fixed rear windshield is significantly more expensive and difficult to install. You can also take it off in 20 seconds and wrap it up for convenient storage. The Kemimoto UTV rear windshield is comprised of high-quality HD PVC film, ensuring optimal light transmission and a clear back vision. 600 Denier Oxford fabric is abrasion resistant and suitable for long-term use. The back windshield will keep dust and rain out of the cab while also keeping chilly air and wind away from your neck and back.

When these UTV side view mirrors collide with a tree or an object, they fold up to reduce damage and extend the life of the aluminum alloy mirror. UTV mirrors with ball pivot mount allow for easy 360-degree adjustment. The shell is constructed of high-quality ABS, while the bracket, mirror frame, and lamp frame are made of aluminum alloy. The UTV heavy-duty adjustable side view mirror with light is corrosion-resistant and suitable for all weather situations. The energy-saving LED lamp features a unique light position design that allows it to light one or two bulbs at the same time. The highest illumination angle is 195°, which reduces night vision’s blind spot and improves safety.

Features

• Compatibility: Designed specifically to work with one Tote-A-Lube or Wall-Stacker tank.
• Gravity-fed operation: Uses gravity to deliver fluids, reducing the requirement for external power sources.
• Components: Most likely include basic fittings such as a valve, hose, or nozzle for convenient dispensing and flow control.
• Usage: Suitable for use in workshops, garages, and other facilities that require dependable lubricant or fluid distribution systems.
• Durability: Made of industrial-grade materials to resist heavy use and a wide range of fluid types.

Features

• Function: Designed to mount Tote-A-Lube and Wall-Stacker tanks in an elbow or inclined position to improve gravity-fed dispensing or allow for unique tank combinations.
• Compatible: Works with both Tote-A-Lube and Wall-Stacker tanks, which are routinely used to store and dispense lubricants, oils, and other fluids.
• Material: Most likely built of a robust metal that will provide long-term stability and withstand corrosion and wear.
• Ease of Installation: Simple to install, letting users to efficiently configure their tank systems, particularly in commercial or industrial environments.

Specifications

• Item Located: US
• Width: 10-3/4
• Core Material: Aluminum
• Outlet Diameter: 0.75
• Warranty: 3 Years
• Installation Position: Front Side
• Quantity: 1
• Height: 7.125

Specifications

• Color: Black
• Quantity: 2
• Wiring Harness Included: Yes
• Warranty: 3 Years
• Item Located: US
• Connector: 2 Pins